Signature Mountcutters

Signature - The new generation of the Longridge Trio System.

The Signature, with its stunning, royal blue, anodised guide rail unit and two tone base, incorporates the same engineering technology as the Autograph. It does, however, provide greater speed, proficiency and simplicity.

The calibrated parallelogram feature not only squeezes human error to an absolute minimum but also enables repetition projects to be completed in a matter of minutes. This will be of particular interest to those who tend to have images of the same size and therefore wish to cut standard size mounts on a regular basis.

Efficiency is key; time is money.

Use the Signature system…

If your images are generally consistent in dimension and shape and typically mounted in windows of the same size. The parallelogram also provides extra support to the mount which is an added benefit.

For anyone who frequently cuts mounts to the same size, the Signature offers you the flexibility of repeatedly cutting the same size window without having to mark up each time. The parallelogram is therefore an advantage both in marking out and cutting of the windows.

Midi, Plus or Maxi?

The Mount Cutter you need depends on the exterior size of mount board you use to mount your images. Identify the size of your largest work and consider the border width around it.

Eg. An image size of 400mm x 300mm (16” X 12”) with a 50mm (2”) border adds up to an exterior size of 500mm X 400mm (20” x 16”) so a MIDI system would suit.

Size Chart

Mount Board

This usually comes in A sizes
                 
A2 (594mm, 23.5”)   = Midi system
A1 (841mm, 33”)        = Plus system
A0 (1190mm, 47”)     = Maxi system

Printers

Printed Image Size

up to A3 = Midi system
A2+         = Plus system
A1+          = Maxi system

If undecided between two sizes then it would be prudent to pick the larger system.
Allow yourself flexibility.

Signature System - Whats in the box?

(Midi and Plus)