Accessories & Spares
A collection of accessories and spare parts for Nova Print Processors, including washer inlet and outlet hoses, print clips, holders, adhesives, paper holders, lids and heating elements.
When purchasing your Nova Rapid wash, you will need connect it to your water supply. With one of our plumbkits we make it easy. 54"/1.5m inlet hose and tap fitting kit
When purchasing your Nova Rapid wash, you will need connect it to your water supply. With one of our plumbkits we make it easy. 39"/1.0m universal outlet kit and connector.
This simple, yet effective device holds your print firmly 1mm from the edge with two stainless pins. Print marking is almost undetectable by the naked eye and the patented design makes it easy to produce borderless prints, without the need to change print drums or frames. The user-friendly design makes it easy to handle and ensures you have no contact with the chemistry. Its smooth lines ensure no liquid retention making a rinse and a light shakeall that is necessary between prints.
The very heart of the new FB Processing system, providing paper rigidity and positive print control. This, combined with the unique angled textured slots, ensures prints are easy to handle through the processing system. It is simple to load and ensures borderless prints can be processed. Available in various sizes - only compatible and useable with the Nova FB Processors - does NOT fit archival washers nor standard Nova print processors.
Consists of 4 x Nova Drain Taps and 4 x 6cm Nova Rubber Drain Hoses designed to fit onto all current Nova Slot Processors.
Consists of 4 x Nova Drain Taps and 4 x 6cm Nova Rubber Drain Hoses, 4 x clear 10mm spigot tubes, 2 rubber bungs and 30ml of Acrifix Bonding Cement. This kit is designed to cover refurbishment of all Nova Slot Processors and Print Washers irrespective of age.
Sealing/Bonding Cement and appropriate hardener to bond materials together.
Bonding Cement to seal joints and fill gaps.
This heating system now makes it possible for users of older heating/control systems in their Nova Slot Processors to bring them totally up-to-date.
The main advantages are:
- Faster warm-up times
- More accurate calibration - each Powerstat is individually calibrated
- Neon indicator fitted to control box, to assist with calibration
- Overheat fail-safe devices fitted as standard
- Conforms to all European Safety and CE legislation standards
Units comes complete with controller, sealing rings and each element is 200 watts - these units are not suitable for full submersion in liquid. They have to be installed in a Nova Processor!
NOVA SINGLE POWERSTAT - 200 watts x 1 element designed to fit all Nova Film Processor models, and Tandem processors.
NOVA DOUBLE POWERSTAT - 200 watts x 2 element designed to fit all Nova Print Processor models of Clubmate, Trimate, Tri-Rapid, Quad, Penta & FB.
|ANVIK||Nova RC Washer Inlet Kit||£12.46||£14.95|
|ANUOK||Nova Universal Outlet Kit||£12.46||£14.95|
|ANCLIP||Spare Print Agitation Clip||£13.29||£15.95|
|ANFL1008||10 x 8 Floating Lid||£3.29||£3.95|
|ANFL1612||16x12 Chemical Slot Lid - 44cm||£3.29||£3.95|
|ANFBH1008||8 x 10" FB Print Holder||£14.96||£17.95|
|ANFBH2016||16 x 20" FB Print Holder||£20.79||£24.95|
|ADT||Processor Drain Tap - Spare||£3.74||£4.49|
|C35201||6cm Rubber Drain Pipe 12mm OD||£1.04||£1.25|
|ANRDP100||Rubber Drain Pipe 1 metre||£6.66||£7.99|
|ANSK1||Nova Spares Kit 1||£16.66||£19.99|
|ANSK2||Nova Spares Kit 2||£24.96||£29.95|
|ANSK3||Tensol Acrylic Cement 30ml - Sealing||£14.96||£17.95|
|ANSK4||Acrifix Bonding Cement - 30ml||£10.79||£12.95|
|C35225||10mm Clear Spigot Pipe||£0.83||£1.00|
|ARHS296||Single PowerStat 200w||£83.29||£99.95|
|ARHD296||Double Power-Stat 2 x 200W||£115.79||£138.95|
|C35301||Water Level Bung||£0.79||£0.95|
|C35300||75mm Water Core Filling Funnel||£2.49||£2.99|