The Nova Protronic Heater/stat is a sophisticated electronic plug-in temperature controller and heater that utilises our Nova Powerstat design. Each model utilises a fully submersible 300W heater element which is capable of heating up to 6 gallons (27 litres) of liquid to your required set temperatures really accurately.
Once set up in your own environment, the unit is fully adjustable and highly accurate giving temperature stability within 0.25°C. Two suction pads are supplied so that the element section can be attached to the container in which it is sited. The highly sensitive temperature sensor probe runs from the control box via a 2m cable and allows you to place it strategically within your liquid container for the best overall accuracy.
The compact element construction measuring just 1" diameter x 11" long (25mm x 279mm) enable them to be attached to the base or side walls of many different types of waterbaths and tanks with the minimum amount of fuss. The controller plugs directly into your mains socket and requires 230volts power supply - each unit has a maximum operating power consumption of 300watts.
EUROPEAN & WORLD Customers (excluding USA and Canada) - A UK 3 Plug is fitted as standard to all our equipment but an optional European 2 Pin Plug adaptor can be purchased to assist you to connect to your electrical supply.
USA & CANADA Customers - Unfortunately, this product is unsuitable for use in the USA & Canada owing to highly sensitive electronic microchip controls which require a 230 volts 50Hz electrical supply. Although a step up transformer can be used to create 230volts from 110volts, the standard frequency of 60Hz also has to be converted to 50Hz in order for the unit to work. You can use a frequency converter but they tend to be expensive.
|APT||Protronic Heater/Stat 300W (full range 20°C to 42°C)||£74.96||£89.95|
|APLUG1||Euro 2 Pin Plug - UK to Schucko||£2.08||£2.50|